Infrared Heater IRHeavy Duty Panel Heaters

Effective heat for premises with large volumes and high ceilings

  • Industrial Heater 

  • Powerful

  • No Heat Losses at the Ceiling 

  • Recommended installation height 4 - 20 m 




Powerful

The IR has a robust industrial design that provides total or supplementary heating for premises with large volumes and high ceilings up to 20 meter. 


Optimal Heat Distribution

The unit is fitted with reflectors made of shiny anodised aluminium that ensures optimal heat distribution.

Ceiling or Wall Mounting

The IR is installed on the ceiling or the wall. The supplied mounting bracket allows the heater to be angled in different positions.


Energy Saving

Radiant heaters provide heating where it is needed, at floor level not in the ceiling. They also give you the possibility to heat only a limited area of a large open space.

Infrared heater IR is a heavy duty panel heater suitable for total or supplementary heating of premises with large volume and high ceilings. It can also be used outdoors for example on sport arena stands or to keep loading bays dry and frostless.

Industrial infrared heater IR is installed horizontally with mounting brackets that can be installed directly against the ceiling or wall. The mounting allows the radiation angle to be adjusted 30° in each direction. The heaters can also be suspended from wire (minimum Ø 3 mm). Industrial infrared heater IR is intended for permanent installation. There are double connection plinths in the connection box that make it possible to further connect from one heater to another.

Protection grille is available as an accessory.

To comply with Ecodesign Regulation (EU) 2015/1188 the unit must be installed either with thermostat TAP16R or with output control RB123 and presence detector PDK65 (accessories). Black bulb sensor and presence detector are available as accessories. Please note that a relaybox RB is required. Regulation for installations not affected by the Ecodesign directive are available as well.