Medium pressure Axial fans

Medium pressure Axial fans

Systemair medium pressure axial fans are offered in sizes from 315 mm up to 2240 mm diameter. Airflow up to 500000 m³/h and static pressure of up to 2800 Pa can be achieved. Higher pressures can be offered with two fans installed in series (AXC-G models). Fan performance in accordance with ISO 5801.


Medium pressure Axial fans

AXC

AXC

Highly efficient impellers

Special aerodynamically profiled impellers made from cast aluminium alloy with flexible blade solidities provide opportunity to achieve optimum efficiency.

A range of different blade/hub configurations gives high flexibility in working points.

Casing

The casing is manufactured from galvanized steel in accordance with DIN EN ISO 1461.The flanges pressed onto both sides in accordance with Eurovent 1/2 provide additional stability.

Long casing as standard, short-cased and sound-insulated options available.

Motors

The IEC standard three-phase motors correspond to the currently efficiency classification valid within the EU. IP55 protection, insulation class F, according to EN 60034-5/IEC 85.

The motors are equipped with PTC thermistors for optimum motor protection. Available as single and two speed motors (switchable poles).

Speed control of the standard motors is possible using a frequency inverter.

Quality

Systemair is certified according to ISO 9001:2008 and ISO 14001:2004.

Systemair‘s quality system is regularly monitored by TÜV Süd.

AXC-G

AXC-G

Two axial fans in series to reach higher pressure demands

 

Highly efficient impellers

The aerodynamically-shaped impellers made from cast aluminium alloy with flexible blade solidities provide optimum efficiency.

A range of different blade/hub configurations enables high operating pressures.

 

Casing

The casing is manufactured from galvanised steel in accordance with DIN EN ISO 1461.

The flanges pressed onto both sides in accordance with Eurovent 1/2 provide additional stability.

Long casing as standard, short-cased and sound-insulated options available.

 

Motors

The IEC standard three-phase motors correspond to the currently efficiency classification valid within the EU.

IP55 degree of protection, insulation class F, according to EN 60034-5/IEC 85.

The motors are equipped with PTC thermistors for optimum motor protection.

Available as single and two speed motors (switchable poles).

Speed control of the standard motors is possible using a frequency inverter.

 

Quality

Systemair is certified according to ISO 9001:2008 and ISO 14001:2004.

Systemair‘s quality system is regularly monitored by TÜV Süd.