Este producto está descatalogado
Símbolo ECOM

KT 100-50-8 Vent. Cond. Rect.

Item Number: 1514

Swing-out

Speed-controllable

Integral thermal contacts

Can be installed in any position

Maintenance-free and reliable

The KT models have impellers with forward-curved blades and external rotor motors. The motor and impeller are mounted on the access cover to facilitate easy maintenance. The casing is manufactured from galvanised sheet steel. To protect the motor from overheating the fans have integral thermal contacts with external leads for connection to a motor protection device. The fans can be installed in any position and are easy to connect using the DS flexible connections. The KT fans have a pre-wired, integral terminal box.

Ecodiseño

Producto
Nombre comercial Systemair
Nombre del preducto KT 100-50-8 Rectangular fan
Ecodiseño
Conformidad ErP 2016
Categoriade unidad NRVU
Conducir MSD externa o VSD
Tipo de unidad UVU
Tipo de recuperacion de calor Ninguno
Proporcion de temperatura (UVU) N / A
QV nom 1,0333 m³/s
P nom 0,916 kW
PS nom 332 Pa
Eficienciad el ventilador 37 %
Fuga externa 5 %
Nivel de potencia acústica LWA 64 dB(A)

Parametros tecnicos

Datos nominales
Tensión (nominal) 400 V
Frecuencia 50 Hz
Fase(s) 3~
Potencia de entrada 2.287 W
Corriente de entrada 4,68 A
Revoluciones por minuto 614 r.p.m.
Caudal de aire máximo 4.865 cfm
Contrapresion estatica minima 0 in.wg
Temperatura del aire transportado máximo 70 °C
Temperatura maxima del aire transportado, con velocidad controladoa 70 °C
Datos de ruido
Nivel de presion sonora a 3m (20m2 Sabin) 58 dB(A)
Proteccion/Clasificacion
Grado de proteccion ,motor IP54
Clase de aislamiento F
Datos de acuerdo a ErP
ErP listo ErP 2016
Dimensiones y pesos
Peso 79 kg
Otros
Tipo de conexión de conducto Rectangular
Tipo de motor AC
RFA
DXF

Circular duct fan for easy and direct installation in ducts.

 

Galvanized steel sheet housing.

 

Service cover. The fan unit is mounted on the service cover for easy cleaning and maintenance.

 

Free-running, forward curved circular impeller made of galvanized steel sheet.

 

Impeller acc. to VDI 2060, balancing quality G 6.3, dynamically balanced in two planes.

 

Voltage controllable external rotor motor (IP44), maintenance-free, the motor is placed inside the air flow for cooling. Integral thermal contacts acc. to EN 60335-2-80 with leads to a motor protection device. Speed-controlled by voltage reduction via transformer.

 

Controllable via frequency inverter and all-pole sinusoidal filter.

 

Terminal box on the casing.

 

For extract and supply air.

 

Installation in any mounting position.

 

For indoor installation.