CB 315-3,0 230V/1

Elektrische kanaalverwarming

Itemnummer: 5386

Electrical duct heater

Duct heater with spigot connection for standard spiral ducts. Manufactured from Aluzinc-coated sheet steel with a heating element in stainless steel. The heater has integral overheating protection with a manual reset function. The CB heater has rubber seals on the connecting spigots. Suitable for control by room thermostat or Pulser. The minimum air volume is based on a minimum air velocity of 1.5 m/s. These duct heaters are designed for a maximum output air temperature of 50°C. The CB can be installed in a horizontal or vertical duct. In a horizontal duct, the connection box should be installed facing upwards, or rotated 90° to one side. Installation with the connection box facing downwards is not allowed.

Technische parameters

Nominale gegevens
Spanning (nominaal) 230 V
Ingangsvermogen 3.000 W
Ingangsstroom 13 A
Luchtstroom min. 430 m³/h
Regelaar en sensoren
Toegestane omgevingstemperatuur max 30 °C
Afmetingen en gewichten
Kanaalafmeting; Rond, aanvoer 315 mm
Kanaalafmeting; Circulair, afblaas 315 mm
Gewicht 5,4 kg
Kanaalkoeler/verwarmer Elektrische verwarming
Type kanaalverbinding Rond
A = Verwarmingselementen



Oververhittingsbeveiliging met automatische reset



Oververhittingsbeveiliging met handmatige reset






Fase onderbreking relais



Thyristor type Pulser of TTC

ø D = 315 mm
DTV500A Itemnummer: 96807 DTV500A

DTV500A incl connection kit

Pulser M Itemnummer: 5144 Pulser M

Triac regeling, slaaf, 16 Amp

TG-K330 Itemnummer: 5160 TG-K330

Kanaalsensor, temperatuur, 0-30°C

TG-K360 Itemnummer: 4846 TG-K360

Kanaalsensor, 0-60°C